Self-serve control of your Display test
FroggyAds is a self-serve demand-side platform connected to a global ad network with 750+ SSP integrations. You choose the Display audience, set the budget and launch without waiting on a sales cycle.
A 160x600 banner is a wide-skyscraper Display creative: 160 pixels wide and 600 pixels high. Its 4:15 shape gives you one narrow column for a recognizable brand, one offer and one clear next step. FroggyAds lets you take that finished creative, choose the Display audience and sources you want, cap your spend and judge the placement by the leads or orders you accept. This guide shows you how to design, inspect and test the banner before you buy traffic.
Choose the wide skyscraper when your offer can be told in a short top-to-bottom sequence: advertiser, one benefit, one supporting detail, one action. It suits portrait-friendly products, simple services and single-feature offers. It is a poor fit for price-comparison tables, landscape photography or several competing promotions. We list 160x600 among our Display sizes, so you can run it inside a self-serve campaign with your own budget cap, audience selection and source controls. Your accepted leads or orders then show whether the banner and placement deserve more spend.
Google lists the wide skyscraper separately from the 120x600 skyscraper and the 300x600 half-page. All three share the 600-pixel height, but width changes line breaks, image crops and how much supporting detail you can keep. The pixel areas and ratios below are plain arithmetic, not performance predictions.
| Size | Google's name | Canvas area | Aspect ratio | What it means for the layout |
|---|---|---|---|---|
| 120x600 | Skyscraper | 72,000 px | 1:5 | The tightest column. Expect very short lines and a minimal logo and benefit stack. |
| 160x600 | Wide skyscraper | 96,000 px | 4:15 | Room for a logo, a short headline, a cropped product and an action, stacked in order. |
| 300x600 | Half-page | 180,000 px | 1:2 | More space for imagery and copy, so it needs its own composition rather than a squeezed copy. |
Use the height to separate ideas: advertiser and benefit at the top, one supporting detail in the middle, the action below. That order is a design suggestion, not proof that visitors see the entire unit. Check where the slot appears and which devices receive it, because accepted dimensions alone do not establish placement visibility.
Use the table as a screening step before you commission artwork. These are production judgments, not conversion claims.
| Offer type | Fit for 160x600 | What to adjust |
|---|---|---|
| A single product with a portrait-friendly shape | Strong candidate | Crop to the identifying feature and keep the logo recognizable at native size. |
| A simple service, trial or course with one verified feature | Strong candidate | Name the service, give one benefit and send the full detail to the destination. |
| An app or SaaS sign-up with one clear benefit | Good candidate | Use one screen or icon, not a feature grid, and make the action describe the next page. |
| Price comparisons or multi-product bundles | Needs rework | Reduce to a single proposition or choose a wider placement. |
| Landscape photography or dense infographics | Needs rework | Recompose the image for a vertical crop. Do not shrink it until it is illegible. |
If essential wording becomes tiny or the product is unrecognizable after cropping, simplify the offer before buying impressions. Do not imitate a system warning or a download control that misrepresents what happens after the click.
A good creative still needs a buying platform that lets you control who sees it, what you spend and how you read the results. These are the FroggyAds capabilities that matter most for a 160x600 test.
FroggyAds is a self-serve demand-side platform connected to a global ad network with 750+ SSP integrations. You choose the Display audience, set the budget and launch without waiting on a sales cycle.
Our minimum deposit is USD 50, and Display pricing starts from USD 0.10 per 1,000 impressions. The deposit funds your account and is not a campaign price. The starting rate is an entry point, not a forecast of what your targeting will cost.
Use whitelists and blacklists to keep sources that fit your offer and remove sources your records show are weak. Your 160x600 results stay linked to the sources that delivered them.
We integrate Adscore alongside internal quality controls to help filter bot traffic. These tools reduce avoidable waste. Your own lead and order records still decide what counts as a useful customer.
| # | Component | What to check |
|---|---|---|
| 1 | Placement And Device Context | Preview the actual slot beside its surrounding content, on the intended devices. |
| 2 | Exact Dimensions | Inspect the exported file: 160 pixels wide and 600 pixels high, without distortion. |
| 3 | Message Hierarchy | Read from top to bottom. One benefit should lead naturally to one action. |
| 4 | Brand And Imagery | Keep the advertiser recognizable and crop the image without losing the product's meaning. |
| 5 | Copy And Action | Use short lines and leave material offer conditions readable at native size. |
| 6 | File And Animation Rules | Check the receiving ad platform's accepted format, file weight, animation and click-through rules. |
| 7 | Accessibility And Quality Review | Review contrast, legibility, licensed assets and truthful claims in the final export. |
| 8 | Variant And Performance Record | Give each meaningful version its own name so its placement and results remain identifiable. |
Approve the exported asset, not only the editable design. Compression, font substitution and cropping can change what a viewer actually receives.
Connect the guide to live testing
Bring one readable 160x600 export and a matching destination to FroggyAds. Choose the available Display targeting that fits your offer, set a spending limit and keep each creative identifiable in the campaign record. Confirm that the selected inventory accepts your size and file before you fund a larger test, then compare accepted outcomes with the delivery your setup reports.
Create My Free AccountReview the placement preview, current acceptance rules and intended inventory. Format support is not a promise of available supply.
Create a native 160x600-pixel export. Do not stretch a 300x600 design into the narrower width: recompose the image, copy and spacing.
State the single reason this audience should respond. Remove competing offers before you reduce text size.
Sketch the advertiser, benefit, supporting detail and action. Space these blocks so they do not collapse into one dense strip.
Choose a crop that still identifies the product. Rewrite long lines for the narrow width instead of compressing letter spacing to force them in.
Google accepts uploaded JPG, PNG and GIF image ads up to 150KB. Those limits describe Google's rules and do not establish FroggyAds acceptance or HTML5 requirements. Verify the requirements shown in your campaign setup before exporting.
Read qualifications and action text at native size. Check contrast and asset rights. If an important condition cannot stay legible, reduce the offer's complexity instead of hiding it.
Preview the export beside page content. Check its top, middle and bottom, including a scrolled view with only partial exposure.
Bring your prepared wide-skyscraper creative to FroggyAds and build the media test around a defined audience, budget and source selection. Keep the creative versions identifiable while you compare delivery. Use the campaign references your tracker retains to connect visits with the leads or orders your business accepts, and review those outcomes before you change your spend. Create your free FroggyAds account when the banner and destination are ready.
Check loading, placement visibility and the destination before you blame the message. Allow customer-action reports to mature before you compare results.
Choose an accepted customer action as the business outcome. Delivery, viewability and clicks help you investigate the path to it. There is no universal primary metric or successful click rate for every wide-skyscraper campaign.
| Measure | Meaning and limitation | When to review |
|---|---|---|
| Accepted customer actions | Count leads or orders that meet your stated acceptance rule. Allow for rejection, cancellation and the attribution window. | After the action and its acceptance checks mature |
| Viewable share | The share of measurable impressions meeting the reporting system's visibility rule. It does not prove attention or understanding. | During the initial placement check |
| Partial exposure | A page preview can reveal which part of the tall creative is visible. Do not claim a measured exposure rate without instrumentation. | Before launch and when the placement changes |
| Click-through rate | Clicks divided by impressions. Compare like-for-like inventory, because a higher rate can still produce fewer useful customer actions. | Once each variant has enough comparable delivery |
| Outcome quality | Review which attributed leads or orders were accepted, rejected or cancelled, and why. | After the normal validation or cancellation window |
| Creative Fatigue | A sustained decline may justify a new creative, but changes in audience, placement or delivery can also explain it. | Across comparable periods, not from one weak day |
Record the reporting period and attribution rules. Reconcile advertising and sales records before you treat attributed orders as confirmed revenue.
Choose the execution format
A fixed 160x600 banner belongs in a compatible Display placement. It is not a Push notification, Native asset or Pop destination. Use FroggyAds to configure the Display campaign, and give any other format its own creative and acceptance check instead of a renamed copy of this file.
Create My Free AccountHypothetical example: a lamp retailer uses one vertical product crop, one benefit and a shop action. If the lamp becomes unrecognizable at native size, change the crop before you change the budget.
For a hypothetical language-course ad, a designer names the course, gives one verified feature and invites readers to see the syllabus. The full curriculum belongs on the destination page.
Hypothetical example: a designer keeps the offer and visual identity but restacks the image, benefit and action. The rectangle is recomposed for the column, not squeezed into it.
If a headline wraps into many short lines, rewrite it around one benefit. Do not solve excess copy by shrinking every line.
A viewer seeing only the upper portion should still recognize the advertiser and the proposition. Do not reserve all useful meaning for the final frame or bottom edge.
Use a short action that describes the destination. Check its legibility without making it resemble a misleading system control.
Dense clusters followed by empty gaps interrupt the reading order. Adjust the composition within the creative, then inspect it again beside real page content.
Inspect the exported logo and product at native size. A crop that hides the identifying feature needs another composition.
These checks reduce avoidable production mistakes. They do not establish that a particular placement, offer or audience will convert.
Keep three amounts separate. The minimum deposit is USD 50 on FroggyAds and funds your account. The campaign price depends on the Display inventory, targeting and competition you choose, with Display pricing starting from USD 0.10 per 1,000 impressions. Your test budget is a decision you make from your own economics. We do not set it for you.
A simple planning formula: the number of accepted outcomes you need to see, multiplied by the highest media cost per accepted outcome you can afford. Hypothetical example: you want to see 10 accepted orders and your maximum media CPA is USD 8. Your test budget is USD 80, which is above the USD 50 deposit. Fund the account accordingly and set a spending limit and review point before launch.
Hypothetical calculation: 20,000 impressions at USD 1 CPM cost USD 20. Four accepted orders give a USD 5 media CPA before creative and other costs. These are illustrative inputs, not our rate or a forecast. A starting rate of USD 0.10 CPM would make the same 20,000 impressions USD 2 on paper, but treat that as the lowest entry point rather than the price you should expect. Compare the complete acquisition cost with your margin, because four orders alone cannot establish repeatable performance.
The canvas contains 96,000 pixels, but area alone does not predict response. Treat the 160-pixel width as the binding constraint. In a first test, compare one concise headline against one benefit-led headline. Keep the audience, landing page and bid unchanged, and judge both versions by accepted outcomes after the same maturity window. Approve one readable export and a working destination before you commission more variants.
Put the guide into practice
Once your narrow export and destination are ready, use FroggyAds to buy a controlled Display test. Record the creative, source and accepted customer action together, and increase the allocation only when that combination gives you a reason to buy more.
Create My Free AccountKeep the opening benefit consistent with the landing page. Someone who clicks to inspect a course, product or price should find that subject immediately, with the same important terms. Before you buy traffic, check that the page loads securely, explains material conditions and offers a working action or exit. Run a test record through any form, checkout, consent banner and tracking path.
We list 160x600 among our display sizes. Use our source reporting, whitelists and blacklists to separate placement performance from creative changes: if a new banner and a new source group launch together, you cannot tell which one moved the result. Confirm accepted files and available inventory for your targeting before you buy.
Keep each named creative and its results. Compare equivalent audiences and placements so a delivery change is not mistaken for a better design.
A 160x600 campaign should answer one question: can a tall, narrow creative keep one promise legible across the full placement? Define the audience and destination before launch. Save the exact wide-skyscraper asset, source scope and accepted event with the test, and change one element at a time. Stop when the rendered message, landing continuity or accepted-outcome evidence no longer supports your hypothesis.
Review the banner at native size to confirm dimensions, readable wording, visible qualifications and a coherent reading order. A placement preview adds context, including surrounding content and partial visibility.
Neither review proves attention, a useful click or a sale. Those questions require campaign evidence tied to the intended audience and a working destination. If acceptance rules or the offer change, recheck the exported creative before you reuse it.
A 160x600 banner is a wide-skyscraper Display creative, 160 pixels wide and 600 pixels high, with a 4:15 aspect ratio. It makes sense when your offer reads well as a short vertical sequence: advertiser, one benefit, one action. We list 160x600 among our Display sizes, so you can test it in a self-serve campaign. Confirm file acceptance during campaign setup.
Google names 120x600 a skyscraper, 160x600 a wide skyscraper and 300x600 a half-page. Their canvases hold 72,000, 96,000 and 180,000 pixels. Width changes line breaks and crops, so each size needs its own composition. Do not stretch a 300x600 file into 160 pixels. Recompose the image, copy and spacing for the narrower column.
Our minimum deposit is USD 50, and Display pricing starts from USD 0.10 per 1,000 impressions. The deposit funds your account. It is not a campaign price or a recommended test budget. Your actual cost depends on inventory, targeting and competition. Work out a test budget from the accepted outcomes you need to see and the maximum media cost per outcome you can afford.
FroggyAds is a self-serve demand-side platform connected to a global ad network with 750+ SSP integrations. For a 160x600 test you choose the Display audience, set a spending limit, use whitelists and blacklists to manage sources, and review source-level reporting. You launch the campaign yourself, then use those controls to scale what works and cut what does not.
Put the advertiser and one benefit near the top, and write for the narrow width instead of shrinking type. As a layout exercise, a 12-pixel inner margin leaves a 136-pixel text column. This is not a FroggyAds requirement. Place your real headline in it, check the line breaks, and use a short action that describes the destination.
Export a native 160x600 file and check the format, file weight and animation rules shown in your campaign setup. Google accepts JPG, PNG and GIF uploads up to 150KB, but those limits describe Google and do not establish FroggyAds acceptance. Inspect the exported file itself, not just the editable design, and keep the source file with your named versions.
Use cost per accepted lead or order as the main decision metric, and treat delivery, viewability and click-through rate as diagnostics. A higher click rate can still produce fewer accepted outcomes. Keep placement, attribution rules and reporting windows comparable. Let pending leads and orders mature before you compare variants or raise the budget.
We integrate Adscore alongside internal quality controls to help filter bot traffic, and you can use whitelists and blacklists to keep or remove sources. These tools reduce avoidable waste. Your own records still decide quality: review which attributed leads or orders were accepted, rejected or cancelled, and restrict a source only when the evidence supports it.
Check production issues first: wrong dimensions, a crop that hides the product, unreadable qualifications and slow loading. Then check the placement and partial visibility, and then the landing page and tracking path. Last, review accepted outcomes by source. Fix the problem your evidence shows, and keep the other test conditions comparable.
Start with one verified offer, two named creatives, one matching destination and a fixed spending limit. Choose the Display audience, keep placement and attribution comparable, and record the campaign ID, creative version and accepted event together. Review after your set maturity window, then keep, restrict or retest. Create your free FroggyAds account once the banner and destination are ready.
Google's uploaded-ad documentation confirms the wide-skyscraper size. Responsive-ad guidance concerns a different asset workflow, not permission to stretch a fixed-size export. Check the receiving platform's current rules.
Use these prompts to hand over the actual creative and the decisions needed to run it.
Include a preview of the intended vertical slot and identify the devices or inventory it represents. Note any unverified placement assumptions.
Record the final filename and its 160x600-pixel dimensions. Check the exported file independently of the design canvas.
Identify what the viewer should understand from the upper portion and what the middle and lower sections add.
Supply the approved crop and logo, with the relevant asset rights. Confirm both remain recognizable at native size.
Record the final benefit, material qualification and action text. Check that the destination continues the same offer.
Keep the ad platform's current acceptance rules with the export review. If animated, inspect every frame and the final state.
Note any wording that required enlargement or simplification. Do not pass an export whose essential conditions remain unreadable.
Name the alternative creative, the one decision being tested and the result needed to keep or replace it. Keep the earlier export available.
Test your wide skyscraper with our self-serve display campaigns, source reporting and targeting controls.
Create My Free AccountThe 160x600 canvas has 96,000 square pixels and a width-to-height aspect ratio of 4:15. Those measurements describe a production constraint, not an expected audience response. The narrow column must identify the advertiser, state a useful benefit and make the next action understandable. We recommend approving the final-size view before you add animation or buy more inventory.
Consider a synthetic resize example. A 300x600 design squeezed to 160x600 keeps its height but reduces its width to 53.33% of the original, distorting the product, lettering and logo. Uniformly reducing the same design to 160 pixels wide instead produces a 160x320 image, leaving 280 pixels of the 600-pixel canvas to compose. Rebuild the visual hierarchy for the new shape. Neither resize is a finished wide skyscraper.
Changing the file label does not fix this. A filename containing 160x600 can still contain a 300x600 image. Inspect the exported image dimensions independently and save the result with the creative version. Our Display specifications list the wide skyscraper, but the selected campaign still needs to accept your actual file type and size. An editor preset is not an upload approval.
For a hypothetical layout exercise, allow 12 pixels inside each vertical edge. The remaining text column is 160 minus 24, or 136 pixels wide. This is an exercise, not a required FroggyAds safe zone or a universal recommendation. Place your real headline in that width, then inspect its line breaks, punctuation and material conditions. Use the space to decide which words to remove, and do not infer a reliable character limit from pixel width alone.
Review the product crop separately from the copy. A portrait-oriented object might fit naturally, while a landscape product photograph might lose the feature being advertised. Keep the important feature recognizable in the exported asset. When it cannot fit, use another crop or a genuinely different composition rather than silently changing the product's shape. The destination should show the same product configuration and qualification that the banner invites the visitor to inspect.
A 160-pixel column also changes the action text. Compare a concise action such as View plans with an unnecessarily long instruction. The wording should describe the destination, not promise a download when the click opens a pricing page. Where a qualification belongs to the offer, keep it near the claim instead of moving it into an unreadable bottom line. The review is about comprehension at the served size, not how polished the enlarged design board looks.
Create separate previews of the upper portion and the full height. Ask whether the advertiser and proposition remain identifiable when the lower action is outside the view. These previews help you inspect the composition. They do not record how many visitors saw it, so do not convert a screenshot review into a measured viewability rate or a claim about time spent reading.
The geometry gives a useful warning. In a synthetic 160x600 rectangle, showing the full width and 300 pixels of height exposes 48,000 of its 96,000 square pixels: 50%. Showing only 128 pixels of width over the same height exposes 38,400 square pixels: 40%. Vertical exposure alone cannot describe the visible area when the slot is also clipped horizontally. These are area calculations only, with no timing, obstruction or user-attention measurement.
Use the reporting provider's stated viewability definition for actual campaign interpretation. Keep the name of that provider and the measured denominator in the report. FroggyAds source performance and your customer outcomes answer different questions from a geometry check. A readable banner can still receive unsuitable traffic, while a suitable audience can still meet a broken destination.
Supply the exact production file, its dimensions, the approved destination and the one creative change being tested. Retain a separate editable source alongside the compressed export. Ask the receiving platform for its current limits: Google's uploaded-image specifications in the source list describe Google's rules, so verify the file-size and animation requirements of the network that will receive your banner.
Before you submit your FroggyAds campaign, open the final export at its intended size and follow the destination with a permitted test action. Verify which campaign references your tracking route retains, without putting customer information in a public URL. Keep that result with the creative version, so you can investigate the file, placement and customer journey separately when a response is weak.
Choose FroggyAds when you want to keep the 160x600 creative linked to the audience, budget and sources you can act on. A same-size creative test might compare a product-led opening with a service-led opening for one offer. Keep the destination and acceptance rule stable, and check the actual distribution between variants instead of assuming that uploading two files produces an equal or randomized experiment.
A comparison with a 120x600 skyscraper or a 300x600 half-page asks a different question. The available placements, audience and price may change with the size. Report that as a comparison of the size-and-inventory combinations you bought, not proof that width alone caused a better result. This guide stays on the narrow 160x600 reading column. Use the broader banner size guide when you choose a portfolio of shapes.
Hypothetical dataset, not a FroggyAds benchmark: two source groups each receive 40,000 impressions at USD 40 media spend. Group A produces 80 clicks and eight accepted enquiries. Group B produces 160 clicks and four accepted enquiries. Both groups have a USD 1 CPM. A has a 0.20% click-through rate and USD 5 media cost per accepted enquiry. B has a 0.40% click-through rate and USD 10 media cost per accepted enquiry.
B attracts more clicks in this invented example, yet costs twice as much per accepted enquiry. That is a reason to inspect the underlying records, not to declare A the winner automatically. Confirm the same reporting window, campaign purpose and acceptance rules, and allow pending leads to mature. A small dataset does not establish repeatable superiority, and the arithmetic excludes creative production and follow-up costs, which belong in a separate full-cost review.
Use our source controls to act on the decision that review supports. Keep suitable delivery, restrict a demonstrably weak source, or retest after fixing the destination, and keep the old export and source record when you make the change. Your next purchase should answer a specific remaining question about this wide-skyscraper campaign rather than simply add impressions.
Start your 160x600 wide-skyscraper banner campaign with FroggyAds
Direct answer: Put the advertiser and one useful benefit near the top, use the middle for a supporting visual or detail, and give the next action a clear place in the reading order. Review the actual 160x600 export at native size and under partial exposure before launch. We help you test that prepared creative through FroggyAds Display campaigns, while your customer records confirm accepted outcomes.
Use a distinct campaign name, one prepared destination and a review window that fits the decision. The evidence should cover the 160x600 version, view context and accepted post-click event. Traffic delivery is an input to the test. It does not guarantee a lead, sale, signup, ranking or profit.
| Control | Record before launch | Review question |
|---|---|---|
| Vertical reading order | Save the 160x600 export with its advertiser, benefit, supporting detail and action in a deliberate sequence. | Can a viewer understand the offer when only the upper portion is visible? |
| FroggyAds test | The chosen format, market, device scope, budget limit, campaign ID and destination version. | Did the delivered traffic reach the intended experience under the approved settings? |
| Accepted result | 160x600 version, view context and accepted post-click event within the declared observation window. | Does the result justify the next budget or creative decision? |
Guide attention through the vertical space with a connected message instead of stacking unrelated claims. When that measurement path is ready, create your free FroggyAds account for this 160x600 banner traffic test.